Hear what noted engine builder Frank Beck says about The Boost Cooler®!

“This (Snow Performance water-methanol injection system) substantially cools the air charge temp, boosts the octane and acts as an additional intercooler….we use on all our street boosted applications.”

-          Frank Beck- Owner,  Frank Beck Racing Engines.

quoted in Engine Builder Magazine- April 2016

Kenny Duttweiler Adds 30hp To His Supercharged 2015 Mustang BY Just Bolting On A Stage-3 Boost Cooler®

Kenny Duttweiler  Adds 30hp To His Supercharged 2015 Mustang  BY Just Bolting On A Stage-3 Boost Cooler®

“I don’t endorse products often, but this just flat-out works” – Kenny Duttweiler

see link for entire article:

http://www.mustangandfords.com/how-to/engine/1605-s550-upgrades-728-rwhp-with-a-blown-and-meth-injected-coyote-powerplant/

News Flash!

2012 Mustang  E85 Car Makes  50HP More With the Addition Of “The New” Stage-2 Boost Cooler® Water-Methanol Injection System!

The question of “what happens when you put water-methanol injection on top of E85?” was addressed recently at Rob Williams Racing in Denver CO. The test vehicle was a 2012 Mustang equipped with a 5.0 Aluminator crate engine and a Ysi trim Vortech running 18 lbs of boost.

Since the car had relatively high static compression ( 11:1) and boost, even with fresh E85, timing peaked at 18º on the non- water/meth runs before knock occurred. Rear wheel horse power peaked at 914rwhp with just E85. With water-methanol’s cooling  and octane enhancement, peak timing went to 22º which resulted in an additional 50hp increasing peak to 964rwhp.

Interestingly, more power could have been wrung out with changes in air fuel ratio which proved extremely rich during the water-methanol runs.

Johnny Lightning Is The First Mustang Cobrajet In The 7’s Using Snow Performance’s Stage-2 Boost Cooler®

Johnny Lightning is the First Mustang Cobrajet in the 7’s using Snow Performance’s Stage-2 Boost Cooler®

In the first time out for 2016, Johnny lightning wheel standed his way to a 7.96 sec ¼ mile in Florida. He was able to do it with the addition of a Water-Methanol Injection system  by Snow Performance. “This car has always been in the 8’s. The Snow injection cut a good 2-tenths from our time and a full 90ºf from our charge air temps - It works!”

Amazingly, this was accomplished using 100% water. Even more could have been attained by adding 50% methanol to the Snow Performance system. To view actual product used click on link:

http://www.snowperformance.net/Stage-2-Boost-Cooler-Water-Methanol-Injection-Kit-p/210.htm

Some details:

1. 2013 Ford Mustang Cobrajet

2. Kennebell Supercharger running 40psig.

3. 1/4 mile time: 7.96@ 176mph (previous best was 8.20 sec @174)

4. Water-methanol system:  Snow Performance New Stage-2 ( part # 210), running 3-nozzles and “700” pump upgrade.

5. Fluid used: 100% water

6. IAT temps – Before: 230ºf, After water injection: 140ºf.

All About Octane!

Curious about octane and how it relates to your high performance vehicle? Check out the below article to get a clear understanding of octane and how it can eliminate engine harming detonation.

Snow Performance Feature Install : Paying Tribute To SEAL Team Six – Diesel Army Style!

"You never really forget the day that one of the largest acts of Terrorism was carried out against the United States. In 2001, an unforgettable day in US history occurred, and from that day forward started a 10-year manhunt for the person(s) responsible.

A group of a dozen men known as “SEAL Team Six,” infiltrated the compound of Osama Bin Laden and put him to rest, bringing closure to the United States for all the lives lost on 9/11/01. Armen Adjarian, owner of True Bliss Customs in Canoga Park, California wanted to build a truck dedicated to these men. He knew he had to pick a truck that would be suitable for the men of Seal Team Six and he decided a 2009 Ford F450 Super Duty was the perfect choice."

Check out the below link to read the full article and see this Snow Performance meth injected beast!

http://www.dieselarmy.com/features/truck-feature-paying-tribute-to-seal-team-six-diesel-army-style/

Check out all our injection systems at:

http://www.snowperformance.net/Diesel-water-methanol-injection-kits-s/101.htm

BMW M Introduces Water Injection

Working close with experts in the industry, BMW M group will be introducing water injection to there M4 GTS Concept and future production models that are utilizing high boost levels.

Not only will the implementation of water injection improve the HP and boost levels achieved from a OEM manufacture but will also add safety, cooling, cleaning, and longevity to the direct injected motors being used in the M line up of vehicles.

You can be sure that Snow Performance will be keeping a close eye on the production of these models and be the first water-methanol manufacture to offer upgrades to your OEM water injection set up.

Click Below To Read Full Article:

http://wot.motortrend.com/1508_bmw_concept_m4_gts_debuts_in_monterey_previews_more_extreme_model.html